Racingline Monobloc Big Brake Kit VWR65G701 << Click the link to buy now
All the power in the world is next to useless if your stock brakes aren’t up to it. Our RacingLine Monoblock Performance Brake Upgrade is an ultra-durable, fast-road & track solution developed exclusively for VWG cars. We’ve developed these brakes from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet, all at an affordable price.
Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers.
The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf R kit.
A bigger, 345mm ‘triple-grove’ disc gives greater heat capacity, thus reducing the effect of fade.
Smart design features such as our ‘Tru-Loc’ hub adaptor system plus built-in pad-wear indicators are all part of RacingLine’s typical attention to detail.
Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars.
The ‘Monoblock’ construction of our 4-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging.
GROOVED & VENTED
The discs, with integral mounting bells, use our ‘Triple Groove’ design across the face for improved bite and debris clearance.
Discs made from high cast carbon – a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors.
Engineered exclusively for VWG cars, with piston sizes matched to master cylinders and servos for perfect responses. A full kit of supporting bells, brackets and lines included.
Composite Ceramic Sport Pads are included with the ideal compound for fast-road & track use. Unusually for a brake upgrade kit, we’ve included pad wear sensor.
FULL INSTALL KIT
Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Bolt on – then drive!
Ideal colour for R models.
Colour matched to factory GTI.
PRECISION ENGINEERED FOR PERFECT PERFORMANCE.
345x28mm one piece disc with directional curved cooling vanes
Triple hook groove design for improved bite & debris clearance plus reduced distortion / vibration
Cast Carbon disc material withstands high temperature stresses without excessive material expansion
Composite Ceramic pads with working temperature 50C-700C & 0.48 friction rating
Braided stainless steel brake lines for firm pedal response
Saving unsprung weight is really important on a performance car. All those heavy masses on the ‘road-side’ of your springs – the wheels, tyres, suspension arms and of course brakes – make a massive difference to the car’s responses as it turns and handles bumps in the road, differences you can really feel as a driver.
So we’ve spend a lot of our development and design time making sure that our Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – a single piece caliper is stronger, stiffer and can therefore be lighter than equivalent 2-piece calipers.
VW Golf 7 2012+ 5G
VW Golf 7 GTI 2013+ 5G
VW Golf 7 R 2013+ 5G
VW Golf 7 GTI ClubSport 2016+ 5G
VW Passat 2.0 TSI B8 2015+ 3G
Audi A3 2012+ 8V
Audi S3 2013+ 8V
Audi TT III 2014+ 8S
Audi TT 2.0 TSI III 2014+ 8S
Audi TTS III 2015+ 8S
SEAT Leon III 2012+ 5F
SEAT Leon Cupra III 2014+ 5F
Skoda Octavia III 2013+ 5E
Skoda Octavia vRS III 2014+ 5E
Skoda Superb 1.8 / 2.0 TSI 2015+ B8 3V
Minimum 18″ wheel diameter required